Plixer Endpoint AnalyticsΒΆ

When Plixer Endpoint Analytics integration is enabled, an additional tab will be available when inspecting hosts under Explore > Entities.

This tab will show the following details for the endpoint:

  • MAC address
  • Plixer Endpoint Analytics profile
  • OS
  • Switch port location
  • Risk Profile, etc.

Note

To learn more about Plixer Endpoint Analytics and additional licensing options, contact Plixer Technical Support.

Configuration Guide

After setting up a Plixer Endpoint Analytics account, configure integration in Plixer Scrutinizer as follows:

  1. Navigate to Admin > Settings > Plixer Beacon.
  2. Tick the checkbox to enable Plixer Endpoint Analytics integration.
  3. Enter the IP address or hostname of the Plixer Endpoint Analytics deployment.
  4. Enter the Plixer Endpoint Analytics user password when prompted.
  5. Select the Plixer Endpoint Analytics port that will be used to communicate with Plixer Scrutinizer (default: 443).
  6. Select the protocol to use for communications (default: HTTPS).
  7. Enter the username to use to connect to Plixer Endpoint Analytics.
  8. Click Save to save the entered settings.

Important

Plixer Scrutinizer will retain time data from Plixer Endpoint Analytics, which is based on the timezone of the account used for integration.

The times displayed in Plixer Scrutinizer from Plixer Beacon will be displayed based on the timezone of the Plixer Beacon integration account settings.

Troubleshooting

If there are issues with the integration, try the following steps:

  • Check Plixer Scrutinizer logs for errors.
  • Verify that the correct credentials were entered during configuration.

For additional assistance, contact Plixer Technical Support.