Support for distributed collectors

Plixer Scrutinizer supports a distributed architecture where numerous servers can collect flows with a central reporting server for reporting on flows across all of the collectors. Secondary reporting servers can also be configured for redundancy/fail-over purposes.

• The distributed Plixer Scrutinizer system allows the collection system to ingest several million flows per second across several servers - regardless of physical location.

• In addition to increased flow volume, the distributed architecture allows the solution to receive flows from tens of thousands of flow exporting devices.

• The reporting server provides a central interface for managing all exporters, flows, interfaces, and alarms across the distributed cluster.

• The distributed architecture solution requires additional configuration. Contact Plixer if interested in this solution.

Network ports used

The following network ports are used in communications between servers in a distributed environment.

These ports are used for two-way communication between the collector(s) and the reporter(s):

• TCP port 22

• TCP port 80 (or 443)

• TCP port 6432 and 5432

The following port is used for communication from the collector(s) to the reporter(s):

• UDP port 514