Plixer Endpoint AnalyticsΒΆ

When Plixer Endpoint Analytics integration is enabled, an additional tab becomes available when inspecting individual hosts (e.g., in the Monitor > Hosts view)

This tab will show the following details for the endpoint:

  • MAC address

  • Plixer Endpoint Analytics profile

  • OS

  • Switch port location

  • Risk Profile, etc.

Note

To learn more about Plixer Endpoint Analytics and additional licensing options, contact Plixer Technical Support.

Configuration Guide

After setting up a Plixer Endpoint Analytics account, configure integration in Plixer Scrutinizer as follows:

  1. Navigate to Admin > Plixer > Endpoint Analytics and tick the Enable checkbox.

  2. Enter the IP address or hostname to send API requests to.

  3. Enter the password to send with API requests.

  4. Enter the port to use for sending API requests.

  5. Use the dropdown to select the communication protocol for API requests.

  6. Enter the username to send with API requests.

  7. Click Save to save the entered settings.

Important

Plixer Scrutinizer retain date and time data reported by Plixer Endpoint Analytics, which is based on time zone of the account used for integration.

Troubleshooting

If there are issues with the integration, try the following steps:

  • Check Plixer Scrutinizer logs for errors.

  • Verify that the correct credentials were entered during configuration.

For additional assistance, contact Plixer Technical Support.