EndaceProbeΒΆ

With EndaceProbe integration enabled, Plixer Scrutinizer can use specific flow data to generate Endace-Probe-based Reports that automatically download the relevant packets.

To set up EndaceProbe integration, follow these steps:

  1. Launch the scrut_util prompt by running:

    /home/plixer/scrutinizer/bin/scrut_util
    
  2. At the SCRUTINIZER> prompt, use the following commands to configure the probes:

    • Adding an EndaceProbe:

      SCRUTINIZER> endace add
      
    • Removing an EndaceProbe:

      SCRUTINIZER> endace remove
      
    • Updating an EndaceProbe:

      SCRUTINIZER> endace update <host_ip> <port> <endace_user> <endace_pass>