Endpoint Analytics#
Endpoint Analytics enables access to the following additional endpoint details in Scrutinizer (for example, via the Monitor > Hosts view):
MAC address
Endpoint Analytics profile
OS
Switch port location
Risk profile, etc.
Note
Further details are available in the Endpoint Analytics online documentation.
Configuration Guide#
After setting up an Endpoint Analytics account, configure integration in Scrutinizer as follows:
Navigate to Admin > Plixer > Endpoint Analytics, and then tick the Enable checkbox.
Enter the IP address or hostname to send API requests to.
Enter the password to send with API requests.
Enter the port to use for sending API requests.
Use the dropdown to select the communication protocol for API requests.
Enter the username to send with API requests.
Click Save.
Important
Scrutinizer retains date and time data reported by Endpoint Analytics, which is based on the time zone of the account used for integration.
Troubleshooting#
If there are issues with the integration, try the following steps:
Check Scrutinizer logs for errors.
Verify that the correct credentials were entered during configuration.
For additional assistance, contact Plixer Technical Support.